PLC and SCADA

Reading Time: 2 minutes

PLC & SCADA

    PLC

      Module 1:

      • PLC Fundamentals – (Block diagram of PLC’s)Applications and Types of Transformers
      • Selection of PLC components( Power supply, CPU, I/Os List , Communication bus Various ranges available in PLC’s)
      • I/O list selection /li>
      • Open-Circuit and Short-Circuit Tests
      • Types of Inputs & outputs / Source Sink Concepts
      • Parallel Operation of Transformers
      • Wiring of the I/O devices
      • Architectural Evolution of PLC
      • Introduction to the field devices
      • Types of Inputs & outputs / Source Sink Concepts
      • Wiring of the I/O devices
      • Concept of flags and Scan cycle execution

      Module 2:

      • Concept of flags and Scan cycle execution
      • Setting up PLCs / Connecting CPU, I/O modules, Rack, Backplane and Communication bus
      • Connecting Field devices to PLCs I/Os

      Module 3:

        Programming instructions arithmetic and logical

        • Load /and /or/out / and Read / Write
        • Compare / Add / Sub /And /Or – Blocks
        • Edge / trailing edge instructions
        • MOVE block application, Timer and Counter Blocks programming
        • Advanced instructions,
        • File handling and Comment functions
        • Master control /set /reset function

        Module 4:

        • Monitoring Arrays & Tags of User-Defined Data Types
        • Editing Ladder Logic Online
        • Troubleshooting Controller Problems
        • Monitoring GSV/SSV Instructions
        • Forcing I/O & Toggling Bits
        • Troubleshooting I/O Module Problems
        • CPU, I/O module replacements
        • Fault detection and error handling

        SCADA System Syllabus :

          Module 1:

          • SCADA system application( Oil GAS / factory /Metro/ Solar Power Plant /Steel Plant )
          • Calculation SCADA tag.
          • Selection of Software basis of SCADA Tag.
          • Creating Database of Tags

          Module 2:

          • SCADA Screen /Creating & Editing graphic display with animation
          • Data Entry / Start Stop command
          • Analog entry
          • Sizing, Movement, Blinking, Visibility, Filling
          • Trending
          • Creating & Accessing Real-time
          • Creating & Accessing Historical Trend

          Module 3:

          • Creating Alarms & Events
          • Connectivity with the different hardware
          • Communication protocols(modbus/ TCP/IP)
          • Communication with PLC
          • Communication with Data Acquisition System
          • Troubleshooting the application
          • Fault diagnostics and error handling
          • Sorting communication problems