CCNA

Reading Time: 4 minutes

CCNA

    Module 1: Networking concepts

    • Components of network – router, switch, hub, bridge etc
    • Types of Network – LAN, MAN, WAN, VPN, PAN & Content Network
    • Defining Network requirements – NIC- Ethernet (CSMA/CD)
    • 10/100/1000 mbps DUPLEX (Half/Full/Auto) – Connecting Media – Coax.
    • 10 base 2T – UTP/STP – CAT 1/2/3..
    • Straight through/cross crimping (only details no practical)
    • Fiber optics – Single/Multimedia
    • 100 Base TX/FX etc – wireless communication.
    • Ethernet cabling Standard.
    • Connecting Devices
    • Repeater – Hub – Switch – Bridge – Topology – Bus/Star/Ring

    Module 2: OSI – Model

    • 7 Layers – Communication between the Layers (Encapsulation & De-encapsulation) – PDU.
    • Layer 2 – MAC/LLC – 802.3/802.2 (SAP/SNAP) /Ethernet II – Frames
    • Broadcast/Collision domain – point of -Hub/Switch/Router
    • L4 – 3way handshake – windowing – and about – Connectionless
    • Packet size [64B (mini) to 1518B (Max)]

    Module 3: TCP/IP Model & Ipv4 Addressing

    • All Layers of TCP/IP Compound with – OS
    • Application Layer – TFTP/FTP/SMTP/TELNET/SNMP/DNS
    • Transport Layer – TCP/UDP – TCP Segment Format
    • 3 way handshake/windowing – UDP segment Format
    • Internet Layer
    • IP datagram format – Protocol No. – TCP 6 – UDP 17
    • ICMP – ARP – RARP
    • Introduction to IP addressing – Class A/B/C/D/E
    • Private IP address – First OCTET range etc.

    Module 4: Subnetting

    • Default Subnet Mask
    • Class C Subnetting & Practice no. given
    • Class B Subnetting & problems
    • Class A Subnetting & problems

    Module 5: Introduction to IPV6

    • Introduction
    • Host Address Assignment
    • Unicast, Multicast and other Special ipV6 Addresses
    • Configuring ipV6 Routing and Routing Protocols
    • Translations between ipV4 and ipV6
    • Summary

    Module 6: Basic of Router & Configuration

    • When Router used – LAN with WAN connect – to connect networks of different IP
    • Different interface of Router – AUI /S0/S1/AUX – console / BRI etc.
    • Cables used in different interfaces/purpose of interfaces
    • WAN interface cable – EIA/TIA – 232/449/530 – V.35 – X.21
    • Different CISCO series – modular/fixed – 10mbps/100 etc
    • Straight through between DTE & DCE

    Module 7: Different modes of operation & basic commands

    • ROM – POST – BSL – ROM-MONITOR PRG – MINIIOS
    • Different interface of Router – AUI /S0/S1/AUX – console / BRI etc.
    • DRAM -Running Config
    • NVRAM – Startup Config
    • Flash MEM – IOS

    Module 8: IP Routing

    • IP Routing, Static Routing & Default Routing
    • Static Routing & Default Routing
    • Dynamic Routing and RIP
    • RIP

    Module 9: Dynamic Routing EIGRP & OSPF

    • Limitations of distance vector algorithm
    • Features of EIGRP and its operations
    • Configuring EIGRP – “Auto-redistribution”
    • Verify and troubleshooting EIGRP
    • Features of OSPF and its operation
    • Configuring single area OSPF
    • Verify and troubleshoot OSPF

    Module 10: Access List

    • Purpose/advantage of Access-list
    • IP [-for a host – for a network/sub network].
    • Std IP access-list – wild card calculation
    • Extd IP access list
    • Switch port ACL
    • Step involved in creating access list
    • Applying access list at the interface – (inbound/outbound)
    • Named access-list for IP
    • Access-list in Telnet sessiont

    Module 11: WAN Technologies

    • Leased line
    • P to P communication
    • HDLC & PPP protocol-features
    • Enabling HDLC & PPP
    • PPP Link
    • PPP layer & its explanation/role
    • PAP/CHAP role
    • Configuring PAP/CHAP using commands
    • VPN
    • Describe VPN technology
    • Importance Of VPN
    • Benefits & Role
    • Impact & Components
    • Frame-Relay
    • Packet Switched Network
    • Virtual circuit – DLCI – Access-link – CRI – FECN – BECN – LMI
    • Enabling Frame-relay
    • Inverse ARP
    • Configuring frame-relay for
    • Mesh Network
    • Star Network
    • Combination of above two
    • Switching
    • Switching Operation and Configuration
    • Function –add-learning / Forward-filters the Frame / loop avoidance
    • Redundant path and its problems
    • Spanning Tree Protocol – purpose – its different state (blocking/listening/learning/forwarding)
    • Modes of operation of switch/Bridge
    • Port duplexing
    • Switch & hub – half duplex
    • Switch & Server – full duplex
    • CISCO catalyst switch 1912 & 1924 interface details
    • M/K/I modes
    • Basic and advanced commands
    • Enabling & configuring MAC address table
    • VLAN Configuration
    • VLAN – ISL – Trunking
    • Enabling Trunking
    • Assigning VLAN No. & name
    • Configuring ports to a specific VLAN
    • VTP purpose
    • VTP domain
    • VTP modes of operation
    • Switching Technologies (including VTP , RSTP , PVSTP, 802.1q)
    • Implement Basic Switch Security (including Port Security , Trunk access .etc )
    • Wireless LAN
    • Wireless Intro & Operation
    • Standards associated with Wireless Media (including WI-FI Alliance, ITU/FCC)
    • Ad-hoc mode, infrastructure mode
    • SSID, BSS, ESS
    • Basic Parameters to configure on a Wireless Network
    • Wireless Security Feature’s (WEP, WPA 1 / 2 )
    • Implementing Wireless Networks